mens | womens | childrens | resole/repair | shoe care
Bespoke & postal order service
If you don't fit our standard sizing we can probably still make you a pair of Conkers, we just need to get a more detailed profile of your feet. Follow the instructions below to produce a foot drawing or visit our shop for a personal fitting.
- You will need: Two sheets of thin A4 paper (one for each foot), a sharp pencil, a cloth dressmakers tape measure (in mm), and a friend. NB Very thick socks or using a thick pen can make a size difference so wear the socks you intend to wear with your new shoes.
- Stand naturally with one foot on each piece of paper on a hard surface.
- Ask your friend to draw round both feet using a sharp pencil. KEEP THE PENCIL UPRIGHT AT ALL TIMES, especially at the heel.
- Lift your toes up off the paper and ask your friend to slip the tape measure under each foot in turn to make a measurement around your feet.
- The measurement should be in millimetres, all the way around the foot at the widest part (from the big toe joint to the protruding joint behind the little toe joint). Before removing the tape, mark its position and the dimension in mm on the foot drawings.
- Your finished drawings/profiles should look similar to this.
Please also make notes on the profiles of any problems you normally have when buying shoes.
- Send your foot drawings with your name, address, usual shoe size, choice of style, colour and sole to the address below. Our bespoke service is an addtional £29.00. If you have very
‘difficult’ feet you should visit us for a fitting, having first made an
appointment by telephone on 01803 862490.
The Conker Shoe Company
28 High Street, Totnes, Devon, TQ9 5RY.